Tel:86-10-63718629 / +86 18518316054 / 86-10-63716559
  Current location : Home page > Products > Photocatalytic Reaction Kettles > CEL-GPCR100 stainless steel temperature control reactor
Click to return to product center  
CEL-GPCR100 stainless steel temperature control reactor

Model:CEL-GPCR100

Place of Origin:Beijing

Brief introduction: According to the GB/T23761-2009 standard of photocatalytic air purification material performance test method, A reactor designed for special photocatalytic materials. The photocatalytic reactor is a fully enclosed square reactor, It has a size of 200mm*100mm, The distance between the surface of the passing sample and the window is about 5.0mm, Baffles can be equipped as standard according to requirements, Increase the gas-solid reaction time. Reactive gas can only pass between the surface of the sample and the window. The light path window material can choose ultraviolet high-transmittance quartz glass.

Contact now

 According to the GB/T23761-2009 standard of photocatalytic air purification material performance test method, A reactor designed for special photocatalytic materials. The photocatalytic reactor is a fully enclosed square reactor, It has a size of 200mm*100mm, The distance between the surface of the passing sample and the window is about 5.0mm, Baffles can be equipped as standard according to requirements, Increase the gas-solid reaction time. Reactive gas can only pass between the surface of the sample and the window. The light path window material can choose ultraviolet high-transmittance quartz glass.

CEL-GPCR100 stainless steel temperature control reactor, using 316L stainless steel integrated processing molding, to achieve sandwich temperature control, various forms of catalyst reaction, standard American anlok needle valve, three-way ball valve, quick connection plug, temperature and pressure display, all joints are made of 3mm stainless steel ferrule structure, to achieve ready-to-use.


feature

◆Reaction tank, the bottom is heated by water bath

◆On the cover, to replace the catalyst, just open the cover

◆Upper board, fixed quartz window

◆Quartz view, window size 200x100mm

◆Baffle, catalyst carrier, baffle structure makes the reaction more fully

◆6mm to 3mm ferrule joint, air inlet, connecting 3mm steel pipe

◆6mm to 3mm gasket joint, gas detection port, connected to 3mm steel pipe

◆Needle valve, used to adjust system flow and pressure

◆Three-way ball valve, switching valve

◆Blind hole, reserved port


Copyright 2009-2020 @ Beijing China Education Au-light Technology Co., Ltd.        Jingicp Bei no.10039872

Service hotline

010-63716865

Scan and pay attention to us