Tel:86-10-63718559 / +86 18518316054 / 86-10-63718559
  Current location : Home page > Products > Solar Simulators > CEL-AAAS Solar Simulator
Click to return to product center  
CEL-AAAS Solar Simulator

Model:CEL-AAAS50 CEL-AAAS100

Place of Origin:Beijing

Brief introduction:The solar simulator is used to simulate the real sunlight conditions and is widely used in the research and quality inspection of solar photovoltaic devices.

Contact now

The solar simulator is used to simulate the real sunlight conditions and is widely used in the research and quality inspection of solar photovoltaic devices.

The solar simulator has the characteristics of beam collimation, uniform spot, and spectrum matching with sunlight. It can complete experiments that require sunlight irradiation conditions. It is suitable for single crystal silicon, polycrystalline silicon, amorphous film, dye sensitization, organic, III- V semiconductors. The solar simulator is not only used in solar cell research, but also for photoresponsive device testing, surface photovoltage spectroscopy, photocatalysis, photocatalyst, liquid crystal substrate testing and evaluation, cosmetics, coatings, light resistance experiments of various materials, photobiological Inspection and testing, surface defect analysis and other fields.

The solar simulator is used to simulate solar equipment. In the photovoltaic field, it is equipped with electronic loads, data collection and calculation equipment, which can be used to test the electricity of photovoltaic devices (including various solar cells). Performance, such as Pmax, lmax, Vmax, etc. and IV curve, etc.


Advantages

1. Conform to the standards of AAA simulator specified by ASTM E927-5, IEC60904-9 2007 Ed2, JIS C8912;

2. AM1.5G air quality filter to ensure perfect spectral matching;

3.High-precision optical integrator, uniform light output;

4.USHIO, OSRAM xenon lamp bulb, energy decay is slow, performance is stable and reliable;


Technical Parameters

Items

CEL-AAAS50

CEL-AAAS100

Light size

 

 

50mm×50mm

2inch×2inch

100mm×100mm

4inch×4inch

Working distance

120mm±30

330mm±50

Optical power output

100mW/cm²±20%

1Sun1000W/m2

100mW/cm²±20%

1Sun1000W/m2

Linearity

0.01%

0.01%

Spectral matching level

 

                      A

                          A

Spatial inhomogeneity rating

 

                      A

                          A

Time stability level

 

                     A

                           A

Irradiance of illumination   surface

0.7-1.2 Sun

0.7-1.2 Sun

Light output direction

Horizontal,   vertical, any angle

Horizontal,   vertical, any angle

cooling method

Air

Air


Copyright 2009-2020 @ Beijing China Education Au-light Co., Ltd.        Jingicp Bei no.10039872

Service hotline

010-63716559

Scan and pay attention to us